Insulated Lath (Supalath)

← Go back


Supalath insulated roller shutter door components offer all the advantages of conventional roller shutter doors with the added benefit of thermal insulation and added strength.


Supalath is specially designed to accommodate a rigid CFC free polystyrene infill providing thermal insulation or U-Values of 4.5W/M.sq.k for our 75mm lath & 4.3W/M.sq.k for our 100mm lath (undertaken at Exova Warrington APT in Willenhall in accordance with BS EN ISO 10077-1:2006 - certification available on request). This helps to maintain the temperatures inside a premises irrespective of outside conditions, and from an environmental perspective can help reduce energy consumption and lower bills.


Supalath

Our Insulated Lath is provided as twin skin, either flat or single rib, interlocked 0.7mm gauge which is available in two sizes 75mm and 100mm (as mentioned above).


This can be supplied in 8m stock lengths or cut to specific customer requirements. The sections are cold rolled and available in both galvanised steel DX51 Z2 275g to BS EN 10346:2009 and plastisol colour coated finishes, and as it is twin skin, there is the option for different colours (front and back). It has a specially designed vertical seal strips and either a steel picket bottom carrier or plastic bottom carrier to incorporate the rubber seal to complete the installation.


Plastisol Colour Chart

Please click here for the Prelaq 200xt plastisol colour chart.


Aluminium Supalath

Our Supalath can also be produced in alumimium which has all the benefits of our standard steel insulated lath with the added benefit of being much lighter than its steel equivalent. This is manufactured from 3005 H24 0.8mm gauge aluminium to BS EN485-1 (this is not available in colour coated finishes and is only available in 100mm). Please contact us for more information.


Window Inserts (available for 100mm only)

Our 100mm (4") insulated lath has the option for window inserts.  The inserts are specifically designed for visibility and to allow natural light through the door.  The punched insert holes measure approx 45mm (h) x200mm (w).


There are no restrictions on the spacing of the window inserts across the lath, so it can be tailored to the customers requirements, although we would recommend a 50mm gap (minimum) before the first and after the last window insert to allow suitable clearance for fitting inside the supalath guide section.


The window gives customers many benefits such as allowing natural light to enter into the premises thus saving on lighting costs during daylight hours, it gives increased external visibility to allow customers to see waiting delivery trucks etc and security peace of mind allowing customers to see through the locked shutter without having to open it, all this without the door losing any of its structural integrity.


Wind loading certification to BS EN 13241-1:2003+A1:2011 is available on request


Insulated Accessories

We stock a variety of accessories to go with our insulated door section; these consist of the following;


- Insulated guide section which is a guide specially designed to allow the insulated lath to run down, this is a cold rolled, hot dipped galvanised steel section DX51 Z2 275g to BS EN 10346:2009 and available in 6m or 8m stock lengths.


- Top Lath used as a method of bolting the curtain to the barrel of the door.


- Brush strips that clip to the insulated guide to ensure any galvanised or plastisol finishes do not get damaged while the door is being operated, they also act as a good anti rattle solution (alternative brush strips are available, contact us for more information). These are available in 6m or 8m lengths.


Two standard lengths of polystyrene infill for the insulated lath section;


- Infill for the 75mm insulated lath which has 18x45x1200mm dimension,

- Infill for the 100mm insulated lath which has 18x60x1200mm dimensions.


- Rubber safety seal used for insulation purposes as a draft excluder and as a cushion for the door as it reaches the floor. This is available in 25m bundles or can be cut to specified lengths.


- We also supply a plastic bottom carrier available in stock lengths of 5, 6 or 8m, and a metal bottom carrier, available as two sections, a ‘C’ channel (25x40mm) complete with a Picket section which is designed to be welded to the bottom most lath to hold the rubber seal in place.


Should you require and further accessories such as plastic or metal end locks etc, please see our endlocks page or alternatively contact us.


Declaration of Performance

Please contact us for a copy of our laths declaration of performance (DOP).


Online Ordering Form

Why not click here to download a copy of our online ordering form which can be faxed or emailed back to us.



Insulated Lath


75mm Insulated Lath - Technical Specification...

CAD Profile Drawing...

Product: 75mm (3") Insulated Lath (Ribbed - Specify on order)

Product Code: PCSL001WMS (will vary if plastisol)

Material: DX51 Z2 275g & Leathergrain Colour-Coated Plastisol (Galvanised or Plastisol)

Strip Width (mm): 141

Gauge (mm): 0.7

Weight p/m (Kg): 0.78 (Galvanised) 0.80 (Plastisol Coated)

Tolerances (mm): ±1.0

Dimensions (mm): See profile

Drawing Number: WMS031 (Contact for CAD drawing)

Plastisol Colour Chart: Prelaq 200xt (Click here for Chart)


75mm Insulated Lath - Technical Specification...

CAD Profile Drawing...

Product: 75mm (3") Insulated Lath (Flat - Specify on order)

Product Code: PCSL001WMS (will vary if plastisol)

Material: DX51 Z2 275g & Leathergrain Colour-Coated Plastisol (Galvanised or Plastisol)

Strip Width (mm): 141

Gauge (mm): 0.7

Weight p/m (Kg): 0.78 (Galvanised) 0.80 (Plastisol Coated)

Tolerances (mm): ±1.0

Dimensions (mm): See profile

Drawing Number: WMS031 (Contact for CAD drawing)

Plastisol Colour Chart: Prelaq 200xt (Click here for Chart)


100mm Insulated Lath - Technical Specification...

CAD Profile Drawing...

Product: 100mm (4") Insulated Lath (Ribbed - Specify on order)

Product Code: PCSL023WMS (will vary if plastisol)

Material: DX51 Z2 275g & Leathergrain Colour-Coated Plastisol (Galvanised or Plastisol)

Strip Width (mm): 166

Gauge (mm): 0.7

Weight p/m (Kg): 0.91 (Galvanised) 0.93 (Plastisol Coated)

Tolerances (mm): ±1.0

Dimensions (mm): See profile

Drawing Number: WMS031 (Contact for CAD drawing)

Plastisol Colour Chart: Prelaq 200xt (Click here for Chart)


100mm Insulated Lath - Technical Specification...

CAD Profile Drawing...

Product: 100mm (4") Insulated Lath (Flat - Specify on order)

Product Code: PCSL023WMS (will vary if plastisol)

Material: DX51 Z2 275g & Leathergrain Colour-Coated Plastisol (Galvanised or Plastisol)

Strip Width (mm): 166

Gauge (mm): 0.7

Weight p/m (Kg): 0.91 (Galvanised) 0.93 (Plastisol Coated)

Tolerances (mm): ±1.0

Dimensions (mm): See profile

Drawing Number: WMS031 (Contact for CAD drawing)

Plastisol Colour Chart: Prelaq 200xt (Click here for Chart)


100mm Insulated Aluminium Lath - Technical Specification...

CAD Profile Drawing...

Product: 100mm (4") Insulated Alumimium Lath (Ribbed - Specify on order)

Product Code: PCSL045WMS

Material: 3005 H24

Strip Width (mm): 166

Gauge (mm): 0.8

Weight p/m (Kg): 0.29

Tolerances (mm): ±1.0

Dimensions (mm): See profile

Drawing Number: WMS062 (Contact for CAD drawing)

100mm Insulated Aluminium Lath - Technical Specification...

CAD Profile Drawing...

Product: 100mm (4") Insulated Alumimium Lath (Flat - Specify on order)

Product Code: PCSL045WMS

Material: 3005 H24

Strip Width (mm): 166

Gauge (mm): 0.8

Weight p/m (Kg): 0.29

Tolerances (mm): ±1.0

Dimensions (mm): See profile

Drawing Number: WMS062 (Contact for CAD drawing)

Window Inserts - Technical Specification...

CAD Profile Drawing...

Product: Window Inserts (100mm only)

Product Code: PCMS007MS

Material: Styrolux Plastic

Strip Width (mm): -

Gauge (mm): -

Weight p/m (Kg): -

Tolerances (mm): -

Dimensions (mm): See profile

Drawing Number: WMS032 (Contact for CAD drawing)


Insulated Guide - Technical Specification...

CAD Profile Drawing...

Product: 80mm Insulated Guide

Product Code: PCGD024WMS (6m) PCGD025WMS (8m)

Material: DX51 Z2 275g to BS EN 10346:2009

Strip Width (mm): 237

Gauge (mm): 2.0

Weight p/m (Kg): 3.72

Tolerances (mm): ±1.0

Dimensions (mm): See profile

Drawing Number: WMS040 (Contact for CAD drawing)


Top Lath - Technical Specification...

CAD Profile Drawing...

Product: Top Lath

Product Code: PCSL046WMS (6m) PCSL047WMS (8m)

Material: DX51 Z2 275g to BS EN 10346:2009

Strip Width (mm): 95.2

Gauge (mm): 1.2

Weight p/m (Kg): -

Tolerances (mm): ±0.5

Dimensions (mm): See profile

Drawing Number: WMS039 (Contact for CAD drawing)


Picket (Bottom Carrier) - Technical Specification...

CAD Profile Drawing...

Product: Picket

Product Code: PCFD001WMS

Material: DX51 Z2 275g to BS EN 10346:2009

Strip Width (mm): 48.6

Gauge (mm): 1.2

Weight p/m (Kg): 0.46

Tolerances (mm): ±0.5

Dimensions (mm): See profile

Drawing Number: WMS042 (Contact for CAD drawing)


Channel (Bottom Carrier) - Technical Specification...

CAD Profile Drawing...

Product: Channel (Galvanised Bottom Carrier)

Product Code: PCMS010WMS (5m) PCMS011WMS (6m) PCMS012WMS (8m)

Material: DX51 Z2 275g to BS EN 10346:2009

Strip Width (mm): 94.15

Gauge (mm): 0.9

Weight p/m (Kg): 1.13

Tolerances (mm): ±0.5

Dimensions (mm): See profile

Drawing Number: WMS042 (Contact for CAD drawing)


Plastic Bottom Carrier - Technical Specification...

CAD Profile Drawing...

Product: Plastic Carrier

Product Code: PCMS002WMS (5m) PCMS003WMS (6m) PCMS004WMS (8m)

Material: Plastic

Strip Width (mm): -

Gauge (mm): 1.2

Weight p/m (Kg): -

Tolerances (mm): -

Dimensions (mm): See profile

Drawing Number: WMS041 (Contact for CAD drawing)


Rubber Seal - Technical Specification...

CAD Profile Drawing...

Product: Rubber Seal

Product Code: PCMS016WMS

Material: Rubber

Strip Width (mm): -

Gauge (mm): -

Weight p/m (Kg): -

Tolerances (mm): -

Dimensions (mm): See profile

Drawing Number: WMS041 (Contact for CAD drawing)


Guide Brush Strip - Technical Specification...

CAD Profile Drawing...

Product: Brush Strip

Product Code: PCMS013WMS (5m) PCMS014WMS (6m) PCMS015WMS (8m)

Material: Plastic

Strip Width (mm): -

Gauge (mm): -

Weight p/m (Kg): -

Tolerances (mm): -

Dimensions (mm): See profile

Drawing Number: WMS041 (Contact for CAD drawing)


75mm Polystrene Infill - Technical Specification...

CAD Profile Drawing...

Product: 75mm Polystyrene Infill

Product Code: PCMS005WMS

Material: Polystrene

Strip Width (mm): -

Gauge (mm): -

Weight p/m (Kg): -

Tolerances (mm): -

Dimensions (mm): See profile

Drawing Number: WMS041 (Contact for CAD drawing)


100mm Polystyrene Infill - Technical Specification...

CAD Profile Drawing...

Product: 100mm Polystyrene Infill

Product Code: PCMS006WMS

Material: Polystrene

Strip Width (mm): -

Gauge (mm): -

Weight p/m (Kg): -

Tolerances (mm): -

Dimensions (mm): See profile

Drawing Number: WMS041 (Contact for CAD drawing)




 

Home | About Us | Products | Archives | News | Credit | Certificates | Contact

Hosted by: Comp4 Online Services

Site Map

© 2014 West Mercia Sections Ltd. All rights reserved.

Privacy Policy | Terms & Conditions