The world seems to be spinning more and more quickly these days so keep your eye on our news page for any developments within our company or within the industry. Alternatively click the follow link to follow us on twitter...

Jul 2014

The deadline is here for CE marking of structural steel (1st July 2014), are you now using only CE marked steel?

Apr 2014

We are now producing 50x50x5mm (2"x2") galvanised steel angles in stock 8m lengths. Please contact us for more information.

Mar 2014

With the deadline fast approaching for CE marking of structural steel (1st July 2014), are you and your customers ready?

Jan 2014

Our new website has been launched along with a new look, were now also ISO 9001:2008 compliant with our Factory Production Control (FPC) system assessed to BS EN 1090-1 by the UKAS accredited Steel Construction Certification Scheme enabling CE marking of our structural products.

Dec 2013

Merry Christmas and Happy New Year to all of our customers, thank you for all your support over the past year and we hope you all have a prosperous 2014!

Jul 2013

From 1st July 2013 the CPR makes CE Marking mandatory in all member states, including the UK and Republic of Ireland, for all construction products that are permanently incorporated in to building or civil engineering works and are covered by either a harmonised standard or a European Technical Assessment that is in force. This does not apply until July 2014 for structural components.

May 2013

We now have U-Value certification for our 75mm & 100mm Insulated Lath. This was undertaken at Exova Warrington APT in Willenhall in accordance with BS EN ISO 10077-1:2006, certification is available on request or go to our certificates page.

Apr 2013

We have now started to produce the Top Lath Section for our 75mm & 100mm Insulated Lath. Please feel free to contact us for more information or alternatively click here to view on our insulated products page.

Mar 2013

We have completed our own wind load testing on our various lath section in accordance with BS EN 13241-1:2003+A1:2011 (clause 4.4.3) at Exova Warrington APT in Willenhall.

Feb 2013

We have now started to roll 75mmx50mmx5mm angle (3"x2"), 100mmx50mmx5mm angle (4"x2") and 75mmx75mmx5mm angle (3"x3"), please get in touch if this is something that you require...

We have new brickbond/inline punching dimensions for our 50mm & 75mm lath, the dimensions are 152mmx25mm punch holes at 50mm intervals along the 75mm lath and 152mmx28mm punch holes at 51mm intervals along the 50mm lath, have a look in the products section for more information...


Home | About Us | Products | Archives | News | Credit | Certificates | Contact

Hosted by: Comp4 Online Services

Site Map

© 2014 West Mercia Sections Ltd. All rights reserved.

Privacy Policy | Terms & Conditions